Yokogawa YPC4000 Series Modular Calibrator


- +


The Yokogawa YPC4000 series modular calibrator is available in two versions. The YPC4000 is the base unit with three modular sensor bays. A voltage and current meter is integral to the base unit. The YPC4010 is a combination base unit/HART communicator. All HART field devices can be configured, polled, and trimmed using this unit. Device specific commands for more than 200 supported devices, including a number of popular Yokogawa products, are available.

The swappable sensor modules are the key to the versatility of the YPC4000 series. Available sensor modules include a variety of differential, gauge, vacuum and absolute pressure as well as voltage, current and temperature.

The YPC4000 series allows users to view up to four measurements simultaneously on the high resolution 2.6″ x 2.6″ LCD display or compare HART PV and AO values to corresponding values measured. The device is easily navigated via 4 soft keys and 8 hard keys. The unit self tests upon powering up and the installation of sensor modules. A number of functions are includes such as auto shut off, damping, Min/Max value capture, display hold, sensor zero, direct contrast adjustment & tare.

The Yokogawa YPC4000 series ships complete with:

  • Plastic carry-case
  • Test lead kit
  • Batteries
  • Universal power adapter
  • RS232 serial cable
  • Manual

Yokogawa YPC4000 Modular Calibrator Specifications:

Parameter Details
Connections Pressure 1/8″ FNPT, 316ss
Electrical Std. banana jacks (¾” center) for ±50 mA/Volts, HART & Loop leads
Data transfer DB-9 for RS-232C
Accuracy Pressure ± 0.025% to ± 0.10% of F.S including all effects of linearity, repeatability, hysteresis and temperature over the range 23 to 122°F
Current/Voltage ± 0.025% of F.S. ± 0.001% of Span per °F (ref. temp. 70°F).
Pressure Module Limits GI / AI modules 2X range
316ss compatible DN modules 2X range when pressurized on high side only, 150 PSI when applied simultaneously to high and low sides / dry gases only
Modules 2.3″L x 1.3″W x 2.6″D, 8.3 ozs or less. Positive lock with spring latch. Depress latch to release. Electrical connections are PC board contacts to spring loaded receivers on base unit. Cap plugs protect any empty bay(s).


There are no reviews yet.

Be the first to review “Yokogawa YPC4000 Series Modular Calibrator”

Your email address will not be published. Required fields are marked *

Related Products

All our product 100% new & original product condition guarantee.
Secured by RapidSSL which provides strong 128 bit encryption SSL.
Ship to World Wide, wherever you are and whatever your circumstances.